What are the Misunderstandings to Avoid When Buying Straps?

As a Polyester Woven Lashing Strap Wholesaler, share it with you. Nowadays, there are many kinds of strapping belts on the market, and the quality is uneven. Therefore, you need to be careful when choosing. According to relevant persons, there are often the following misunderstandings when purchasing:

Cord Lashing Strap

1. Only care about the weight of a single roll, there is no calculation of the length of the whole roll. The thickness of the straps produced by different strap manufacturers may be different, and the thickness of the same different types of straps is different, which results in the same length of straps. The quality is different, and the price is also quite different. Therefore, different thickness and different types of straps should be selected according to the weight of different packaging objects.

2. Listen to the price of a single roll of packing tape, and do not judge the quality and weight. When buying packing tape, as long as the price of each piece is low, you will feel cheap. In fact, this is a big mistake. Now some dealers are custom-made packing belts with a gross weight, although each piece is 10Kg, but the weight of the paper core is only 2Kg, so in fact, only 8Kg of packing belts are bought. This in vain lost 20% of the cost.

Why is the strap not tightly tied?

As the packing tape has gradually become the darling of the packaging industry, some problems are prone to occur when we use the packing machine for packing. We all know that when the baler is strapping, the tightening force can be adjusted. Sometimes, even if you adjust the tightening force to the maximum, it still doesn't tighten. What is the cause? What should I do when the plastic strapping is not tight?

1. The packaged items are not standardized. The baler also has requirements for the size of the product. The packaged product cannot be too small, round, or irregular. Such products cannot be packaged on the baler.

2. Cooling time. The cooling time of the strapping machine is to make the straps fully glued, especially the automatic strapping machine. This kind of strapping machine uses the strapping produced with pure materials, so more cooling time is needed to bond the strapping Good, so if the cooling time is not enough, the packer cannot tighten the product.

3. The problem of the packer itself. If the strapping adjustment device of the strapping machine is in a loose position, the cassette will wear out too quickly, and the tooth grooves of the cassette block will be filled with scraps, etc., which may cause the problem of the plastic strapping not being tight.

Our company also has Cord Lashing Strap on sale, welcome to contact us.